Impact of Lean Practices on Operational Performance: The Moderating Role of Demand Uncertainty: Evidence from the Malaysian Automotive Industry
DOI:
https://doi.org/10.67476/PM2610301007Keywords:
Lean practices, operational performance, demand uncertainty, malaysian automotive industry, MGAAbstract
Introduction: The research evaluated the effects of lean practices on the operational performance of the Malaysian automotive sector, which factored in the moderating role of demand uncertainty.
Methodology: In this respect, a quantitative research design was employed to test these relationships between two groups of firms in terms of age (i.e., young and established firms) with Multi-Group Analysis (MGA) in SmartPLS, where 395 professionals of different firms took part in the research.
Results: The analysis concluded that lean practices, primarily JIT and TQM, had a considerable impact on the operational performance. The moderation by demand uncertainty was only significant in the association between TQM and performance, which implies that in a high demand uncertainty environment, the effectiveness of TQM decreases. Multigroup analysis was found to be not statistically significant on the effects between the young and the established firms. Also, the use of MGA did not have any significant difference between the young and established firms.
Conclusion: All these results led to further insight into the lean implementation in the Malaysian automotive industry and offered hints to the companies interested in the improvement of operational efficiency and performance
References
Achaka, C. H., Amade, B., Okorochac, K., & Ubani, E. C. (2024). An evaluation of the extent of adoption of lean in offshore facility maintenance projects in the oil and gas industry. PM World Journal, 13(9). Available From: https://pmworldjournal.com/article/an-evaluation-of-the-extent-of-adoption-of-lean
Alaya, L. (2026). A holistic framework for successfully implementing a plant-wide lean pull system: Evidence from an automotive supplier in Tunisia. International Journal of Lean Six Sigma. 17(2), 438-468. https://doi.org/10.1108/IJLSS-03-2024-0060
Belekoukias, I., Garza-Reyes, J. A., & Kumar, V. (2014). The impact of lean methods and tools on the operational performance of manufacturing organisations. International Journal of Production Research, 52(18), 5346–5366. https://doi.org/10.1080/00207543.2014.903348
Chandra, N., Kumar Sharma, S., & Singh, R. K. (2026). Exploring the influence of age on the intellectual capital: a moderating role of firm performance. International Journal of Productivity and Performance Management, 75(3), 809-827. https://doi.org/10.1108/IJPPM-08-2024-0526
De Martini, F. (2021). Supply chains and disruptive events: An inventory management system perspective (Master’s thesis). Università Ca' Foscari Venezia, p.138. Available from: https://hdl.handle.net/20.500.14247/8078
Franke, G., & Sarstedt, M. (2019). Heuristics versus statistics in discriminant validity testing: A comparison of four procedures. Internet Research, 29(3), 430-447. https://doi.org/10.1108/IntR-12-2017-0515
Garcia-Buendia, N., Moyano-Fuentes, J., Maqueira, J. M., & Avella, L. (2023). The lean supply chain management response to technology uncertainty: consequences for operational performance and competitiveness. Journal of Manufacturing Technology Management, 34(1), 67-86. https://doi.org/10.1108/JMTM-07-2022-0250
Guzman, L. (2024). Lean Six Sigma approach to improve further processing efficiency using burger manufacturing as a model process (Master’s thesis). Auburn University. Available From: https://etd.auburn.edu//handle/10415/9203
Hair, J. F., Babin, B. J., Ringle, C. M., Sarstedt, M., & Becker, J. M. (2025). Covariance-based structural equation modelling (CB-SEM): A SmartPLS 4 software tutorial. Journal of Marketing Analytics, 13, 709-724. https://doi.org/10.1057/s41270-025-00414-6
Hair, J. F., Risher, J. J., Sarstedt, M., & Ringle, C. M. (2019). When to use and how to report the results of PLS-SEM. European Business Review, 31(1), 2–24. https://doi.org/10.1108/EBR-11-2018-0203
Hair, J., Hollingsworth, C. L., Randolph, A. B., & Chong, A. Y. L. (2017). An updated and expanded assessment of PLS-SEM in information systems research. Industrial Management & Data Systems, 117(3), 442–458. https://doi.org/10.1108/IMDS-04-2016-0130
Henseler, J., Ringle, C. M., & Sarstedt, M. (2016). Testing measurement invariance of composites using partial least squares. International Marketing Review, 33(3), 405–431. https://doi.org/10.1108/IMR-09-2014-0304
Hibadullah, S. N., Fuzi, N. M., Desa, A. F. N. C., Zamri, F. I. M., & Habidin, N. F. (2013). Lean manufacturing practices and environmental performance in the Malaysian automotive industry. Asian Journal of Finance & Accounting, 5(1), 462. https://doi.org/10.5296/ajfa.v5i1.2864
Iranmanesh, M., Zailani, S., Hyun, S. S., Ali, M. H., & Kim, K. (2019). Impact of lean manufacturing practices on firms’ sustainable performance: Lean culture as a moderator. Sustainability, 11(4), 1112. https://doi.org/10.3390/su11041112
Iteng, R., & Ahmad, M. A. (2017). The impact of technically-oriented lean production practices on operational performances in Malaysian manufacturing industries. Journal of Technology and Operations Management, 12(1), 56–66. Available From: https://e-journal.uum.edu.my/index.php/jtom/article/view/jtom2017.12.1.7
Khairani, N. S., Kasim, E. S., Rajamanoharan, I. D., & Misman, F. N. (2017). Critical success factors of green supply chain management: Case evidence of a Malaysian automotive manufacturer. Asia-Pacific Management Accounting Journal (APMAJ), 12(2), 1–23. Available From: https://ir.uitm.edu.my/id/eprint/29717
Lee, K. L., & Xing, Q. T. (2021). The effect of lean and agile practices on supply chain operational performance in the Malaysian manufacturing industry. International Journal of Industrial Management, 12(1), 319–340. https://doi.org/10.15282/ijim.12.1.2021.6639
Makwana, D., Engineer, P., Dabhi, A., & Chudasama, H. (2023). Sampling methods in research: A review. International Journal of Trend in Scientific Research and Development, 7(3), 762–768. Available from: https://www.ijtsrd.com/papers/ijtsrd57470.pdf
Marodin, G. A., Frank, A. G., Tortorella, G. L., & Fetterman, D. C. (2019). Lean production and operational performance in the Brazilian automotive supply chain. Total Quality Management & Business Excellence, 30(3–4), 370–385. https://doi.org/10.1080/14783363.2017.1308221
Mohammed, I. A., & Mandal, J. (2024). The impact of lead time variability on supply chain management. International Journal of Supply Chain Management, 9(6), 25–39. https://doi.org/10.47604/ijscm.3075
Naeem, M., Ahmad, N., Hussain, S., Nafees, B., & Hamid, A. (2021). Impact of lean manufacturing on the operational performance: Evidence from the textile industry. Humanities & Social Sciences Reviews, 9(3), 951–961. https://doi.org/10.18510/hssr.2021.9393
Noordin, M. A., & Mohtar, S. (2014). Age: Does it matter for firms to perform? International Journal of Academic Research in Business and Social Sciences, 4(3), 252–260. http://dx.doi.org/10.6007/IJARBSS/v4-i3/704
Phadnis, S., Sheffi, Y., & Caplice, C. (2022). Strategic planning for dynamic supply chains. Palgrave Macmillan. https://doi.org/10.1007/978-3-030-91810-1
PR NewsWire. (2024). Malaysia auto industry shifts gears: 73% of workforce gears up for automation & skills challenges: Ken Research. PR Newswire. Available From: https://www.epicos.com/article/811547/malaysia-auto-industry-shifts-gears-73-workforce-gears-automation-skills-challenges
Qin, Z., & Chen, P. K. (2022). Enhancing the resilience of sustainable supplier management through the combination of win–win lean practices and auditing mechanisms—An analysis from the resource-based view. Frontiers in Environmental Science, 10, 962008. https://doi.org/10.3389/fenvs.2022.962008
Rahim, M. H. A., Khan, M. R. B., Lean, C. P., & Purnshatman, T. (2025). Investigating the effectiveness of lean manufacturing principles in improving productivity for a Malaysian automotive company. Malaysian Journal of Business, Economics and Management, 4(1), 85–92.
https://doi.org/10.56532/mjbem.v4i1.48
Rahimi, A., & Alemtabriz, A. (2022). Providing a model of LeAgile hybrid paradigm practices and its impact on supply chain performance. International Journal of Lean Six Sigma, 13(6), 1308–1345. https://doi.org/10.1108/IJLSS-04-2021-0073
Rose, A. N. Md., Deros, B. M., & Ab Rahman, M. N. (2013). A Study on Lean Manufacturing Implementation in the Malaysian Automotive Component Industry. International Journal of Automotive and Mechanical Engineering, 8, 1467-1476. https://doi.org/10.15282/ijame.8.2013.33.0121
Sahwan, M. A., Ab Rahman, Md. N., & Deros, B. M. (2012). Barriers to implementing lean manufacturing in the Malaysian automotive industry. Jurnal Teknologi (Sciences & Engineering), 59(2). https://doi.org/10.11113/jt.v59.2571
Sahwan, M. A., Rahman, M. N. A., & Deros, B. M. (2013). Case studies on the implementation of lean manufacturing in automotive Malaysian companies. Applied Mechanics and Materials, 465-466, 1180–1184. https://doi.org/10.4028/www.scientific.net/amm.465 466.1180
Salleh, N. A. M., Kasolang, S., Jaffar, A., & Halim, N. H. A. (2015). Lean TQM leadership management practices in Malaysian automotive companies. Jurnal Teknologi (Sciences & Engineering), 76(6), 1-6. https://doi.org/10.11113/jt.v76.5663
Salleh Hudin, N., Abdul Hamid, A. B., Chin, T. A., & Habidin, N. F. (2017). Exploring supply chain risks among Malaysian automotive companies. IJASOS- International E-Journal of Advances in Social Sciences, 3(8), 666-674. https://doi.org/10.18769/ijasos.337330
Sarstedt, M., Henseler, J., & Ringle, C. M. (2011). Multigroup analysis in partial least squares (PLS) path modeling: Alternative methods and empirical results. Advances in International Marketing, 22, 195–218. https://doi.org/10.1108/S1474-7979(2011)0000022012
Sichinsambwe, C., Simasiku, P. L., Sikombe, S., & Nyimbili, H. (2023). Kaizen practices and performance improvement in Zambian manufacturing companies. Cogent Engineering, 10(1). https://doi.org/10.1080/23311916.2023.2183590
Sin, M. S., Anbarasen, S., Yew, T. S., & Yuan, W.Z., (2024). Effect of economic factors on the automotive industry in Malaysia. Journal of Sustainability Science and Management, 19(2), 108–123. https://doi.org/10.46754/jssm.2024.02.006
Tao, J., Aamir, M., Shoaib, M., Yasir, N., & Babar, M. (2025). Bridging the gap between supply chain risk and organizational performance conditioning to demand uncertainty. Sustainability, 17(6), 2462. https://doi.org/10.3390/su17062462
Thunyachairat, A., Jangkrajarng, V., Theeranuphattana, A., & Ramingwong, S. (2023). Lean practices, perceived environmental uncertainty, and business performance: a quantitative study of SMEs in Thailand. International Journal of Professional Business Review, 8(5), 1-16. https://doi.org/10.26668/businessreview/2023.v8i5.2137
Tortorella, G. L., Fogliatto, F. S., Galeazzo, A., Furlan, A., & Nascimento, D. (2025). Lean production-based organizational resilience and operational performance of manufacturers during disruptive events. IEEE Transactions on Engineering Management, 72, 800-814. https://doi.org/10.1109/TEM.2025.3532742
Wahab, S. N., Othman, N., Hossain Uzir, M. U., & Yanamandra, R. (2024). Revolutionizing operational excellence: Advancing the automotive industry through lean principles. Environment-Behaviour Proceedings Journal, 9(27), 273–279. https://doi.org/10.21834/e-bpj.v9i27.5568
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Tarig Khidir Eltayeb (Author)

This work is licensed under a Creative Commons Attribution 4.0 International License.